Products
LaRos builds conveyors and parts handling equipment for each step of the process, from under the press to the filled container. Every unit is built to order, and every conveyor ships fully assembled with the belt installed and tracked.
Robot Unload / Beside Press Conveyor
Carries parts from the robot drop zone out of the cell to the operator.
Specifications and photos
Under Press Conveyor
Low-profile conveyors that receive parts and runners beneath the mold and carry them out of the press.
Specifications and photos
Incline Conveyor
Cleated belt conveyors that carry parts up inclines, including angles steeper than 45 degrees, into containers, granulators and other equipment.
Specifications and photos
Horizontal to Incline Conveyor
A horizontal load section that transitions to an incline, with our UHMW-PE belt hold-down through the bend.
Specifications and photos
Nose Over Conveyor
A horizontal section at the top of an incline. Used on grinder feed, robot unload, and other conveyors.
Specifications and photos
Grinder Feed Conveyor
Receiving hopper, cleated belt and discharge chute matched to your granulator, with optional metal detection.
Specifications and photos
Shredder Feed Conveyor
Heavy-duty feed conveyors with large receiving hoppers, metal detection, and reject diverters for shredders.
Specifications and photos
Water Bath / Water Quench Conveyor
The Water-Veyor carries hot parts through a stainless steel water tank to cool and stabilize them.
Specifications and photos
Cooling Conveyors
Fan, vented modular belt, spot cooler, and chilled water cooling for hot parts on the way to the container.
Specifications and photos
Metal Detector Conveyors
Sesotec metal detectors wired into the conveyor, with automatic reject chutes and conveyor stops.
Specifications and photos
Reject Parts Chute / Diverter
The Smart-Chute diverts rejected parts on a signal from the molding machine or a metal detector.
Specifications and photos
Part / Runner Separators
Finger and roller separators that mount to the conveyor and send parts and runners to separate containers.
Specifications and photos
Rotary Separators
Rotary tumbler and screw separators for small parts, family molds, and blow molding moils and tails.
Specifications and photos
Container / Carton Indexing
Inline, over/under, side-by-side, and carousel systems that index containers as they fill.
Specifications and photosWhy LaRos
How LaRos conveyors are built
LaRos conveyors are designed for continuous duty on the plant floor. The same construction standards apply to every unit we build, from a small flat conveyor to a large grinder feed system.
Shipped fully assembled
Every LaRos conveyor ships with the belt installed and tracked, ready to run, including long and wide units that take up a full semi-trailer. On tall inclines, the stand may ship separately to fit the trailer.
Heavy-duty frames
Formed steel channel with welded tube cross members, 10 gauge standard and 7 gauge for heavy-duty applications. Our aluminum frames are structural aluminum channel, never T-slot extrusion.
Large crowned pulleys
Crowned pulleys keep the belt tracking without added guides. Pulley size increases with conveyor width, length and cleat height, which extends belt and cleat life.
Large shafts, bearings and stands
Large shafts and heavy-duty bearings provide longer bearing life, and welded stands keep the conveyor rigid and square in service.
Enclosed drives and take-ups
On most units the gearmotor mounts inside the frame and the take-ups sit within the frame rails. No rotating shafts are exposed along the sides of the conveyor.
Built to last decades
We regularly supply parts for LaRos conveyors that have been in service for more than 30 years, using job and serial records that go back to our first units.
Request a quotation
Tell us about your parts, the equipment the conveyor will serve, and the space available. We will review your application and return a drawing and a quotation. To replace or duplicate an existing LaRos unit, send us the serial number from the nameplate.