Nose Over Conveyor
Nose over is a conveyor shape, not a separate machine: a horizontal section at the top of an incline. We build it into grinder feed, robot unload, and other conveyors to clear equipment, aisles, or guarding, or to discharge parts level.
Application
Clearing obstructions and discharging level
A nose over conveyor adds a horizontal section at the top of the incline. Parts are discharged level rather than off the end of an inclined belt, and the top section extends over equipment or other obstructions. The same shape is used on grinder feed, robot unload, and other conveyors.
515 / 715 series: incline with a nose over at the top.
535 / 735 series: horizontal, incline, and horizontal sections, for work station and obstruction clearance applications. The same shape is built as a decline run-out for robot unload.
Where the belt bends up from a horizontal load section (535 / 735), we use the same exclusive UHMW-PE belt hold-down as our horizontal to incline conveyors, with no hold-down rollers.
Construction
Standard features
- One-piece welded frame on E-series steel units. A-series aluminum frames are bolted
- Exclusive UHMW-PE belt hold-down at the lower bend (535 / 735). No hold-down rollers
- Cleated belt, with cleats welded at the spacing you specify
- 4" side rails
- Crowned pulleys sized to the belt width and cleat height
- E-610 and E-710 frames for wide, heavy-duty applications
- Mounts to a range of LaRos stands
- Shipped fully assembled with the belt installed and tracked
Specifications
Nose over conveyor specifications
| Models | 515 / 715 nose over. 535 / 735 horizontal, incline, horizontal. E-610 / E-710 for wide, heavy work |
|---|---|
| Belt widths | Standard widths of 12", 18", 24", 30", 36", 42", and 48". Other widths available |
| Incline angle | Built to the angle your application requires |
| Top horizontal length | Built to the clearance your layout requires |
| Load and discharge height | Built to your load height and discharge height |
| Cleats | Welded on, 1" to 4" high |
| Drive | AC gearmotor with a variable frequency drive (VFD), typically 115V single-phase input. Other voltages available |
| Finish | Primer and oil-base enamel in any color you specify (steel units) |
In the shop
Nose over conveyors from our shop
Every LaRos conveyor is built on heavy-duty frames with large crowned pulleys and enclosed drives. How LaRos conveyors are built
Available options
- Metal Detectors
- Cooling
- Reversing
- Traffic Cop
Request a quotation
Tell us about your parts, the equipment the conveyor will serve, and the space available. We will review your application and return a drawing and a quotation. To replace or duplicate an existing LaRos unit, send us the serial number from the nameplate.